|
What does the Sag Control option do? Sag control, Zero Pre-load (ZPS), no load and race series all describe the same thing. The TCS Sag Control Option is the correct way to lower
the ride height of your quad. Lets say you took your stock shocks
and installed shorter springs. Since the shock itself has not been valved
correctly for this situation, you would probably bottom out over every jump,
whoop and bump! You would end up with a ride that would be virtually unbearable.
The Sag Control option (or zero preload as most people call it) allows for the
lower ride height that you would want for a motocross track without sacrificing
ride quality. The lower height will allow you to corner far more quickly
and since the shocks are valved properly, allow you to absorb far more impact on
jumps than you would be able to with standard ride height shocks. The
wheels will drop in and out of holes on the track much quicker without loosing
any stability that might normally cause you to get bucked off your quad! If you have a Z400, 400EX, or any other quad that sits rather low to start
with, and you want to ride off-road, probably not. If you have a Raptor,
DS650 or any other quad that sits rather high, this may be an option for you!
|